Thingiverse
Kossel Effector Set
by JensG
11
Downloads
4
Likes
0
Makes
The fan_duct_V3 is adjusted based on the model of AndrewBCN. Thanks Andrew.
Retractable and Hotend Fan Adapter are designed for a bolt circle of 14.5mm.
The insets on the back of the pin socket are for 2.54mm 2x5 pin headers. I use one for permanent 12V (Hotend fan) and one for cooling as shown in the pictures.
To assemble the pin lock, 2 screws M2x10 and a M3x8 are required. The spring size is 5x2mm.
The switch bridge is required so that the endstop can be slightly displaced laterally.
Retractable and Hotend Fan Adapter are designed for a bolt circle of 14.5mm.
The insets on the back of the pin socket are for 2.54mm 2x5 pin headers. I use one for permanent 12V (Hotend fan) and one for cooling as shown in the pictures.
To assemble the pin lock, 2 screws M2x10 and a M3x8 are required. The spring size is 5x2mm.
The switch bridge is required so that the endstop can be slightly displaced laterally.
Sign in to leave a comment
Sign in