Thingiverse
180 DEVIL
by Ziemels
14
Downloads
5
Likes
0
Makes
at this point I have no FPV gear so I didn't include camera mount, when I will receive a camera I will redesign top plate so I can mount it. This is a work in progress and I will update this model with new parts. To assemble the frame I used WN1452 screws.
Frame size: 180mm
Motors: DYS BE1806
ESC: EMAX 12A SimonK
Flight controller: CC3D mounted 90° so you can access usb port from the side
Reciever: Turnigy 9x8Cv2
Battery: Multistar 3S 1400mAh High discharge
Weight with battery installed: 397,5g
this model was inspired by https://www.thingiverse.com/thing:2155553
I wanted a slightly bigger model where I can mount ESC in arms so I made this.
Required printed parts to build the frame:
Bottom_plate 1x
Top_plate 1x
Front 1x
Side 2x
Rear 1x
Lower_arm 4x
Upper_arm 4x
Feet 4x
UPDATE
added mounting holes in bottom_plate for runcam swift
added cutout in top_plate
added cutout in front
T
Frame size: 180mm
Motors: DYS BE1806
ESC: EMAX 12A SimonK
Flight controller: CC3D mounted 90° so you can access usb port from the side
Reciever: Turnigy 9x8Cv2
Battery: Multistar 3S 1400mAh High discharge
Weight with battery installed: 397,5g
this model was inspired by https://www.thingiverse.com/thing:2155553
I wanted a slightly bigger model where I can mount ESC in arms so I made this.
Required printed parts to build the frame:
Bottom_plate 1x
Top_plate 1x
Front 1x
Side 2x
Rear 1x
Lower_arm 4x
Upper_arm 4x
Feet 4x
UPDATE
added mounting holes in bottom_plate for runcam swift
added cutout in top_plate
added cutout in front
T
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!