3D parts for YukkuriCut

3D print parts for YukkuriCut (http://akirayou.net/yukkuricut.php )

Other material:
MDF 300x450 T12 (for ground floor)
MDF 300x300 T5.5 (for 1st floor)
MDF 300x350 T9 (for 2nd floor)
Aluminum L angle 10x10 mm T1 (about 50mm length)
Brass wire φ1 (for wire tensioner )
Slide rail (AP-1121C by AIWA)
Stepping Motor 42mm size
Many M4 screw and few M3 screw
Nichrome wire Φ0.1~0.4
9cm PC FAN(for cooling wire) power must be 2.1W or higher.
ATX power supply or 5V and 12V battery suppl