Thingiverse
Mechaduino parts
by Eriobis
1
Downloads
0
Likes
0
Makes
I just got my mechaduino !!!
First thing first, you need to print the shim ( washers ) to raise the board to get good clearance between the motor and the pcb.
I used 4 40mm m3 screw to fasten the board to the stepper
The lever was made to test the torque mode of the firmware, working pretty great !
First thing first, you need to print the shim ( washers ) to raise the board to get good clearance between the motor and the pcb.
I used 4 40mm m3 screw to fasten the board to the stepper
The lever was made to test the torque mode of the firmware, working pretty great !
Sign in to leave a comment
Sign in