Thingiverse
1S battery charger
by gebeclair
61
Downloads
43
Likes
0
Makes
This very tiny charger can charge up to 3 LIPO batteries (1S) in parallel.
The charge current is 1 amp by default, but can be reduced by changing a resistor on charger board.
It is supplied by a phone charger (2.5 Amp minimum if using the 3 ports at the same time).
It is simply based on 3 TP4056 modules that can be easily found on Ebay for 1$, and JST-DS LOSI 2.0MM 2-Pin Connectors.
Note : the 3 square holes in the top plate have to be filled with hot glue. By doing this, they act as lig
The charge current is 1 amp by default, but can be reduced by changing a resistor on charger board.
It is supplied by a phone charger (2.5 Amp minimum if using the 3 ports at the same time).
It is simply based on 3 TP4056 modules that can be easily found on Ebay for 1$, and JST-DS LOSI 2.0MM 2-Pin Connectors.
Note : the 3 square holes in the top plate have to be filled with hot glue. By doing this, they act as lig
Sign in to leave a comment
Sign in