Thingiverse
Lathe CrossFeed combined parts 11/2013
by keesJalink
100
Downloads
52
Likes
0
Makes
This thing was made with Tinkercad.
The parts together will upgrade a HBM HD250 metal lathe (and probably some related types as well) from manual cross feed to motorized cross feed for extremely smooth turning.
I have printed the upper clamp and gears in PLA with 100% fill and extra slow (35 mm/s), additionally with 130% flow. The lower clamp/body part is printed slow, with 1.4 mm shell thickness and 25% fill (see detail photos) otherwise is uses up 350 g of PLA. I have also temporarily set
The parts together will upgrade a HBM HD250 metal lathe (and probably some related types as well) from manual cross feed to motorized cross feed for extremely smooth turning.
I have printed the upper clamp and gears in PLA with 100% fill and extra slow (35 mm/s), additionally with 130% flow. The lower clamp/body part is printed slow, with 1.4 mm shell thickness and 25% fill (see detail photos) otherwise is uses up 350 g of PLA. I have also temporarily set
Sign in to leave a comment
Sign in