Thingiverse
18650 Quick Tester
von Shawn_T_hingi
8
Downloads
4
Likes
0
Makes
This is a REMIX from https://cults3d.com/en/3d-model/gadget/18650-quick-test-bench
I liked the simple design, but did not have the exact parts needed for the original print. Redesigned for a deep drop in, tabs, hidden wires/contacts and a backing for the case.
Printed in PLA 5% infill with supports on base plate. I left a tiny slit in the bottom of the cell carrier which will need to be widened with a buck knife for the contact to fit and slide lock in place.
Tabs on back cover may flex to much in PETG.
Digital Voltmeter
https://www.amazon.com/gp/product/B083W4TZTP/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Contact Spring
https://www.digikey.com/en/products/detail/keystone-electronics/1107-1/5056817
I liked the simple design, but did not have the exact parts needed for the original print. Redesigned for a deep drop in, tabs, hidden wires/contacts and a backing for the case.
Printed in PLA 5% infill with supports on base plate. I left a tiny slit in the bottom of the cell carrier which will need to be widened with a buck knife for the contact to fit and slide lock in place.
Tabs on back cover may flex to much in PETG.
Digital Voltmeter
https://www.amazon.com/gp/product/B083W4TZTP/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Contact Spring
https://www.digikey.com/en/products/detail/keystone-electronics/1107-1/5056817
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
