Thingiverse
Lighting for Makerbot Replicator 5th Generation
37
Downloads
29
Likes
0
Makes
*** Update 2017-01-07 ****
I added Light Rail, Side -2.0.stl
It seems the diffuser interferes with the ribbon cable at full extension so I modified the design to be more compact. The geometry is the same, but everything is pushed back about 1/2". The rails hang down a little lower, but it's still out of the way of any moving parts. It actually fits well in the under nitch, anyway.
I also hollowed out the rail so it saves on filament. Even though I used foam tape, it introduces a lot of
I added Light Rail, Side -2.0.stl
It seems the diffuser interferes with the ribbon cable at full extension so I modified the design to be more compact. The geometry is the same, but everything is pushed back about 1/2". The rails hang down a little lower, but it's still out of the way of any moving parts. It actually fits well in the under nitch, anyway.
I also hollowed out the rail so it saves on filament. Even though I used foam tape, it introduces a lot of
Sign in to leave a comment
Sign in