Geeetech i3 Z-Axis Top-Caps for 200mm Stepper/Leadscrews by BrendaEM

These top caps allow the use of cheaper but shorter 200mm leadscrews/stepper, commonly found on ebay and amazon. They feature a longer bearing surface than the original part.

Note: minor fitting is required from the leadscrew, which can be done with a rolled-up piece of fine sandpaper wrapped around a wooden dowel. Please clean the bore afterwards, and lubricate with a filament-comparable lube. The leadscrew should turn freely in the bore; make sure the part is fitted so that it does not clim