Thingiverse
Reptile X4R Mount
by dalgibbard
1
Downloads
3
Likes
0
Makes
Remixed from: http://www.thingiverse.com/thing:1723928
Increased the height at which the camera sits, to allow for enough clearance on my 250 X4R with 6" props - the 2208 motors sit the props quite high up on the frame.
Printed in Rigid Ink's PLA Plus filament, with a ~30% cubic infill in Cura @ 0.2. 1.2mm walls and floor; seems pretty rigid.
Note: Need to fit longer screws than the original ones provided with the frame.
Increased the height at which the camera sits, to allow for enough clearance on my 250 X4R with 6" props - the 2208 motors sit the props quite high up on the frame.
Printed in Rigid Ink's PLA Plus filament, with a ~30% cubic infill in Cura @ 0.2. 1.2mm walls and floor; seems pretty rigid.
Note: Need to fit longer screws than the original ones provided with the frame.
Sign in to leave a comment
Sign in