CRO - Raspberry Pi Cluster

Coyote Ridge Observatory

These are the 3D printed parts for the Pi Cluster in the photo.

3D Files

cluster\_pwr\_mnt.stl - snap on the Pi assm. to hold the buck converters.
cluster\_mnt\_\*.stl - go on top of the fans and clip onto the 20mm risers between the Pi.
12mm\_\*\_*.stl - go under the fans and allow screwing assm. to the switch.

One converter needs to be set at 12v for the switch and fans. The other converters are set at 5v with one converter for each two Pi.

If you dr