19" Rack mount helper third hand tool

This little tool is designed to temporary hold 19" network components, which makes their installation easier.Just clamp it to the rack and use it as a “third hand”. There are two Versions v1:In rare cases, where the clamping force isn't high enough for your equipment, you can optionally add a M6 screw from the front.M6x35 screw and M6 nut for main screw → amazon (affiliate link) optional: M6x30 screw and M6 nut for front screwoptional: 6*10x3mm Magnets for stowing the tool on metal surfacesThe second M6 nut and the magnets need to be inserted mid print.You will need to add pauses to the print to insert them, or use my print profile, which already includes the pauses. v2:Higher clamping force with front nut only, choose between vertical or horizontal print orientation, the horizontal print will be stronger but will need some supports while printing and workover after print.You can choose between a variant with 2mm teeth and 1mm teeth for racks made of thinner material.M6x35 scre