7X12 Mini Lathe Way Rail Chip Guard Brush Mounts

This part is designed to fit on the left and ride side of the apron of a 7x12 mini lathe so you can keep all your chips out of your gibs n rail ways as you move the apron left and right. You'll need to print two of these but no worries of mirroring since this is symmetrical and so is the gap it fits into.

You will need to upscale this object by 12.7x or with an X, Y, Z of 101.6mm x 31.74mm x 10.38mm. With this scaling it'll fit the 7x12 perfectly and you'll have press fit 12mm magnets.

The