Raspberry Pi2 Qidi Tech 1 Mount

This is a modification to the RPI2-Bottom_8020 Mount Made by 0110-M-P (http://www.thingiverse.com/thing:922740/#files). You can use any of the RPI2 Tops from him for this.

I stretched out the screw hole mounts to fit my Qidi Tech 1 for use as an OctoPrint Server. You will need 2 M4 x 10 screws to mount it. You should have some extra in the spare parts box that came with the printer.

Measurements between the two screw hole centers are 140mm. These are found on all corners of the Qidi Tech