Tevo Tarantula enclosure - frame brace - z motor plate support.

This is a combination enclosure and frame brace. I'm not going to list all the hardware for this project, just use what you need. I made the sides from 3/8" hdpe and the front from 1/8" clear acrylic, but you can use whatever you want. I used mostly m4x20 and m4x16 bolts, nuts, drop in t nuts and washers plus sheet metal screws as necessary. And magnets to hold the front on, 2 sided tape for the hinges and epoxy for the magnets. Printed in abs, saw cut the hdpe and acrylic.