Xena S Chakram v2

This is an update to my previous design - http://www.thingiverse.com/thing:1712732
per a request I received.

Was asked to split the S Chakram into 2 halves and enable magnets to be added to hold the 2 halves together.

There are 4 pieces to print. Glue the 2 halves together and there should be 4 pockets to glue in rare earth magnets - 4 mm diameter x 2.5 mm height on each side. Glue magnets into these pockets and after the glue cures, attach the 2 halves together.

I modeled the magne