Zarya Particle Cannon 1:1

I have not printed this yet, It should work but if there is any issues please let me know.

At 100% scale the parts do not fit on a normal sized bed. Parts 3 and 7 end up being 624mm long. I would recommend splitting the models up further or printing them at 30 to 40% scale to make all parts printable on 200mm x 200mm machines.

Part 3 did not sit fully flat, so I adjusted it and uploaded it as 3.1

Parts 1-3 where the same asd 5-7. Removed 5-7.