Thingiverse
Rubik's 3x3x3 O-type (2) Square One and Square Two
by faggahz
27
Downloads
18
Likes
0
Makes
It's a derivate of my other O-type cube.
Now the same angle between all cubies so there are more free positions.
Printed in ABS, also PLA should work if carefully sanded.
How to assemble:
Print the round parts, inside there are holes. Cut rods (I've used M3 threaded rods, 3mm filament should work). Glue together (I've used ABS-juice because of my ABS-print). Fix in a vice until glue is dry. Remove plastic blobs, sandpaper if neccessary. Then I have acetone-vaporized all parts to get smoo
Now the same angle between all cubies so there are more free positions.
Printed in ABS, also PLA should work if carefully sanded.
How to assemble:
Print the round parts, inside there are holes. Cut rods (I've used M3 threaded rods, 3mm filament should work). Glue together (I've used ABS-juice because of my ABS-print). Fix in a vice until glue is dry. Remove plastic blobs, sandpaper if neccessary. Then I have acetone-vaporized all parts to get smoo
Sign in to leave a comment
Sign in