Thingiverse
Mini Gun with Rainbow Loom Bands
by spingoogL
241
Downloads
219
Likes
0
Makes
Mini gun designed for rainbow loom bands.
Gun will hold about 84 rounds. There are 12 posts on the barrel, and I can stack 7 bands on each post.
One of each stl part will be required.
Wrap some dental floss in the bands as you load them on.
Besides the printed parts, you will need:
Schedule 40 1" PVC pipe that is 4" long. Ends should be cut square as possible.
1/4" ready rod cut to length as needed(~6").
3x 1/4" nuts (7/16" across flats).
BBs for ball bearings(0.177"/4.5mm diam
Gun will hold about 84 rounds. There are 12 posts on the barrel, and I can stack 7 bands on each post.
One of each stl part will be required.
Wrap some dental floss in the bands as you load them on.
Besides the printed parts, you will need:
Schedule 40 1" PVC pipe that is 4" long. Ends should be cut square as possible.
1/4" ready rod cut to length as needed(~6").
3x 1/4" nuts (7/16" across flats).
BBs for ball bearings(0.177"/4.5mm diam
Sign in to leave a comment
Sign in