Quad MicroSciSky 6mm Motors

This is a frame I designed to accommodate a micro scisky fc, 6x15mm motors, and eachine e010 standard 30mm props with 150mAh battery pack. I used hot glue to secure the fc and motors. Filament used is Colorfabb_XT-CF20 on a Prusa I3 set up with bowden. Splicer used is Simplify3D 3.1.1 with 50% support infill separated .7mm from the sides and 1 layer upper vertical otherwise its a pain to remove. Frame weight is 17g.