Thingiverse
1S Lipo battery case
by oldhui
44
Downloads
44
Likes
0
Makes
This is a case to store 1S Lipo batteries nicely.
I have 2 types of Lipo laying around: Tunigy Nano-Tech 300mAh and 500mAh. Their dimensions are:
300mAh: 30x20x7.5mm
500mAh: 41.5x25.5x8.7mm
I have made the spaces bigger but please check your battery size before printing.
For the hinges, I use some leftover rivet pins/mandrels which are about 2mm in diameter. I pressed the end of the pin in a vice to deform it a bit and it fits nicely. If you use bigger pins then you may want to careful drill the holes to enlarge them.
I have 2 types of Lipo laying around: Tunigy Nano-Tech 300mAh and 500mAh. Their dimensions are:
300mAh: 30x20x7.5mm
500mAh: 41.5x25.5x8.7mm
I have made the spaces bigger but please check your battery size before printing.
For the hinges, I use some leftover rivet pins/mandrels which are about 2mm in diameter. I pressed the end of the pin in a vice to deform it a bit and it fits nicely. If you use bigger pins then you may want to careful drill the holes to enlarge them.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!