1st Generation Neon A/C Vent Insert

This is the insert section for the air conditioning vents on a 1st generation Neon. More parts to come!

Do not print these in PLA; it needs to be PETG or better to withstand the summer sun.

Notes:

The flaps, flap bar, and frame should all fit the stock vent housings if you still have them. The other parts may or may not be swappable into the original housings.

The adjuster bar is directional. Since the face is rounded, the notches under the rounded "top" are not symmetrical. Please pay attention to the orientation while inserting it into its bracket.

Good luck!