MakerWorld

Electronics

1U Wall Mounted Rack

von M2ABRAMS TANK · Electronics

9 Downloads

11 Likes

3 Makes

This is a 1U Server Rack for wall mounting. I highly recommend that you print in a strong material such as PETG or PC, PLA probably would work but depending on what you mount, it could eventually fail.For mounting hardware, make sure you use drywall anchors, and DO NOT screw directly into the wall, it will fail either immediately or rather quickly. This was specifically designed with US Screw #8 in mind, but as long as the screw fits inside the hole (.203in or 5.1562 mm) it will work

computer electronic server print good EasyPrint easy Easy computer accesories server accessory computer accessories computer accessory

Kategorie

Electronics

Quelle

MakerWorld

Veröffentlicht

12.10.2025

Aktualisiert

30.04.2026

Was du zum Drucken brauchst: Mittel Niedrige Konfidenz

Einteilig Hardware nötig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA, PETG, Polycarbonate

Nachbearbeitung

Hardware

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

1U Wall Mounted Rack

Ähnliche Modelle

Zur Sammlung hinzufügen