Thingiverse
1x5x5
von kequals
69
Downloads
62
Likes
1
Makes
A pillowed 1x5x5 twisty puzzle. This puzzle is pillowed and olzed, and can only make 180 degree turns. Turning quality isn't great, but I have managed to solve it.
To make, print each part by the number indicated on the filename.
* 1 Center1
* 1 Center2
* 4 Corner
* 8 Wing Edge
* 4 Side Center
* 4 Side Center Cap
* 8 Corner Center
* 8 Edge Center
You need 5 M3 screws and 5 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The the 1x5 sides use 62mm 4x4 stickers, and the top and bottom stickers can be cut from the template. The corners and center of the top also use 62mm 4x4 stickers.
To make, print each part by the number indicated on the filename.
* 1 Center1
* 1 Center2
* 4 Corner
* 8 Wing Edge
* 4 Side Center
* 4 Side Center Cap
* 8 Corner Center
* 8 Edge Center
You need 5 M3 screws and 5 springs. You can buy them here:
https://thecubicle.us/moyu-weilong-hardware-p-1666.html
The the 1x5 sides use 62mm 4x4 stickers, and the top and bottom stickers can be cut from the template. The corners and center of the top also use 62mm 4x4 stickers.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!