2.5 inch micro quad

So this is one of my test designs i tried. I designed it for 1408 motor with 12mm motor mounting holes diameter. It is for 2.5 inch props. My setup could carry Gopro 7 black and totaly overrided battery of 1500 mah and 80c which is 190g for 2minutes and it landed with 47 percent of battery.
Later i will post pictures of tested one. I used 25mm m2 alu spacers

There are holes for 20x20 stack and 30x30 but for the record be careful how you place your stack because of props.
And i did mine upside down so motors are upsidedown