Thingiverse
2.5" SCAT Coupler
por skysynergy
2
Descargas
0
Likes
0
Makes
*** Please donate if you find this design useful: https://www.paypal.com/paypalme/skysynergy ***
*** I assume no responsibility for the use or application of this on any aircraft. You must obtain proper authorization on your own if it is required. ***
This is a coupler for 2.5" SCAT tubing. If used in an aircraft, it is recommended to use a PETG filament such as:
https://www.amazon.com/Filament-PM-Czech-Made-PETG/dp/B081XJLBHD
The company can also provide a "burn cert" for the material.
You will also need a spring loaded captive pin as in the photo to retain the coupler pin.
NOTE: Use of this in an aircraft may require approvals. *I assume no responsibility*
*** I assume no responsibility for the use or application of this on any aircraft. You must obtain proper authorization on your own if it is required. ***
This is a coupler for 2.5" SCAT tubing. If used in an aircraft, it is recommended to use a PETG filament such as:
https://www.amazon.com/Filament-PM-Czech-Made-PETG/dp/B081XJLBHD
The company can also provide a "burn cert" for the material.
You will also need a spring loaded captive pin as in the photo to retain the coupler pin.
NOTE: Use of this in an aircraft may require approvals. *I assume no responsibility*
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!