2 Color Mastercam Logo

The design was created in an imperial coordinate system, so you might need to scale this design by 25.4X depending on your slicer's default settings.

I printed the inserts separately from the base and popped all the parts together once I had everything. This design is suitable for dual extrusion though!

The STL files are oriented logo face-down by default, but I recommend rotating the base 180 deg about X or Y before printing, to minimize supports.

Keep the insert upside down on the print bed, unless you are dual extruding. Since first layer of a 3D print tends to be thicker than subsequent layers, you're better off trying to fit the top of the insert into the base first. The other reason for doing it this way is that any over extrusion on that first layer will help seal up the seam between the two parts, if you print the parts with the orientations I'm suggesting.