Thingiverse
2 Liter Bottle Funnel Insert
31
Download
26
Likes
0
Makes
Two liter soft drink bottles found in the US can make for some very useful funnels after consuming the contents. However, when cutting the bottom off it leaves very flimsy sides.
I designed a round insert for the cut-open end to stiffen the sides/opening. It's a friction fit and you may have to ever so slightly scale due to potential differences in each bottle. I original designed the ring based on the specs for this 2 liter bottle which stated the outside diameter as 110 mm. That was way too large.
The final dimension which allowed the ring to snugly fit inside the cut-off end was 107.25 mm. You might have to scale up/down by .5 to 1% if the model doesn't fit for you.
There's a 1 mm chamfer around the part of the ring that inserts into the bottle to help slide it on easily.
I designed a round insert for the cut-open end to stiffen the sides/opening. It's a friction fit and you may have to ever so slightly scale due to potential differences in each bottle. I original designed the ring based on the specs for this 2 liter bottle which stated the outside diameter as 110 mm. That was way too large.
The final dimension which allowed the ring to snugly fit inside the cut-off end was 107.25 mm. You might have to scale up/down by .5 to 1% if the model doesn't fit for you.
There's a 1 mm chamfer around the part of the ring that inserts into the bottle to help slide it on easily.
KristusApollo pubblica anche su
11 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
