2 Pac 2.2

2 Pac again but better Project: 2 pac.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 120x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.4mm and the Actual Thickness is 1.36mm Filaments Used: #658697 PLA Overture Gray Blue Transmission Distance: 6.5 #080a0d PLA PolyLite Black Transmission Distance: 0.1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 6.8This print uses 3 unique filamentsSwap Instructions: Start with Gray Blue At layer #7 (0.64mm) swap to Black At layer #8 (0.72mm) swap to Jade White for the rest.