200 German Mark -HueForge

We want it back, the good old Deutsche Mark   If you use the STL, please note the settings. Otherwise, load profile.   Setting: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic White Transmission Distance: 5 Swap Instructions: Start with BambuLab Green At layer #6 (0.56mm) swap to Orange At layer #11 (0.96mm) swap to Red At layer #16 (1.36mm) swap to Jade White for the rest.