Thingiverse
Centrifuge - Quick Print One Piece Gravity Hold System
44
Downloads
22
Likes
0
Makes
USE AT YOUR OWN RISK!
Samples may come loose or break at extreme speeds!
The two slot widths are 11mm and 13mm. If you want a custom slot diameter, leave it in the comments and I can modify the existing file and upload it.
This is a remixed version of the DremelFuge. The differences are in the hold down method and attachment type. This requires a bolt, and works best with a carriage bolt, as the center hole is square. The depth is about 3/4", so a 1" or longer bolt and nut is required
Samples may come loose or break at extreme speeds!
The two slot widths are 11mm and 13mm. If you want a custom slot diameter, leave it in the comments and I can modify the existing file and upload it.
This is a remixed version of the DremelFuge. The differences are in the hold down method and attachment type. This requires a bolt, and works best with a carriage bolt, as the center hole is square. The depth is about 3/4", so a 1" or longer bolt and nut is required
Sign in to leave a comment
Sign in