New Puzzle Box

Video of how it works ---> https://www.youtube.com/watch?v=O2IrISaXv_A
Listed as remix, I used the pins and clip from the Phoenix hand.

Update #1 bottom brace was tight due to swelling of PLA I would resize to +0.1 mm
Update #2 everything works with a bit of shaving, this may be nicer @ 25% bigger, things are a bit tight on the sliding pins.

Last Update - I added a center section for 4 pins on each side, If you have problems printing with supports. Just print 2 of the bottoms, one f