Thingiverse
GEPRC GEP-TX Chimp
by emiel1976
119
Downloads
117
Likes
6
Makes
This is a pod for the GEPRC GEP-TX Chimp.
I did not print it because I have no printer. But for the info I have, this print must fit.
Fc and pdb position is 3mm spacers under the pdb and 10mm between pdb and fc. You have than enough space for the receiver under the fc and the vtx on top of the fc.
Cam size I used is a HS1177/Runcam Swift with a lens that has a diameter of 17mm. Total length of the cam about 30mm.
Cam angle positions are 20, 30, 40 and 50 degree.
I have 1 withoud a gopro
I did not print it because I have no printer. But for the info I have, this print must fit.
Fc and pdb position is 3mm spacers under the pdb and 10mm between pdb and fc. You have than enough space for the receiver under the fc and the vtx on top of the fc.
Cam size I used is a HS1177/Runcam Swift with a lens that has a diameter of 17mm. Total length of the cam about 30mm.
Cam angle positions are 20, 30, 40 and 50 degree.
I have 1 withoud a gopro
Sign in to leave a comment
Sign in