Thingiverse
2020 Frame Spool Holder
door natewu
9
Downloads
5
Likes
0
Makes
I remixed this from ahpolo's [2020 Spool holder](https://www.thingiverse.com/thing:2127226) as his was facing the left side and I wanted mine to be facing the right. I also made it use a bit less material by lowering the screw mount and adjusting the slant of the arm.
This was made specifically for the Tevo Tarantula but it will fit any printer that uses a 2020 frame rail. You can use a T nut to lock it in place.
I had to sand the part that inserts into the frame a bit because my Tarantula isn't calibrated very well, this may vary depending if your printer prints straight enough.
If you need to have it on the other side, you can flip it in your slicer.
This was made specifically for the Tevo Tarantula but it will fit any printer that uses a 2020 frame rail. You can use a T nut to lock it in place.
I had to sand the part that inserts into the frame a bit because my Tarantula isn't calibrated very well, this may vary depending if your printer prints straight enough.
If you need to have it on the other side, you can flip it in your slicer.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
