Thingiverse
Filamentrollenadapter V2 (geteilt) für Kugellager 608 (8mm Bohrung) !neue / verbesserte Version in meinen Entwürfen verfügbar!
by ElSomero
2
Downloads
0
Likes
0
Makes
This roller adapter can be equipped with a ball bearing of size 608 ZZ or 608 2RS.
3 cylinder head screws M3x10mm and 3 nuts M3 are required.
By the seat of the bearing in the middle of the two parts it can not slip out to the side.
The outside diameter of the bearings is 22mm
The inner diameter of the bearings is 8mm.
The notch on the underside of the two parts makes it easier to lift off the heating bed.
Dieser Rollen-Adapter kann mit einem Kugellager der Größe 608 ZZ oder 608 2RS best
3 cylinder head screws M3x10mm and 3 nuts M3 are required.
By the seat of the bearing in the middle of the two parts it can not slip out to the side.
The outside diameter of the bearings is 22mm
The inner diameter of the bearings is 8mm.
The notch on the underside of the two parts makes it easier to lift off the heating bed.
Dieser Rollen-Adapter kann mit einem Kugellager der Größe 608 ZZ oder 608 2RS best
Sign in to leave a comment
Sign in