OLD - Base for Mostly Printed 3D Printer MP3DP

I'm very happy with my MP3DP. The Mostly Printed 3D printer is mostly stiff, but I thought it would be better if there was a strong base, to hold the corners. This makes the XY plane really square. I used the original STL and dxf files to create this.

I cut it using my MPCNC, which I am also quite happy with.

My base was cut from 3/4 inch "red oak" plywood. I cut the relief for the 4 corners and two side plastic pieces at a depth of 3mm.

If you want to cut this with EstlCAM, then use t