DJI MavicPRO Case

I printed one set and found the walls on the bottom to be too thin and bowing so I added 1.5 mm thicker outside sides. This fixed the problem and made the box stronger.

Also, add more depth to the DJI MavicPro logo to because the depth was not deep enough to show up well. I added another 1 mm depth. This fixed that and the logo now shows up well.

Lastly, I added my name to finish off the box, on the one that I made.

Sliced all with Simplify3D. 30% infill.

I credit the original desi