Thingiverse
2040 -> 1/4" Adapter
door Spirou
0
Downloads
0
Likes
0
Makes
Simple 1/4" photo screw adapter plates for 2040 aluminium profiles.
These adapters use 1/4" threaded inserts from Ruthex (https://www.ruthex.de/en/collections/gewindeeinsatze/products/ruthex-gewindeeinsatz-1-4-kameragewinde-20-stuck-rx-1-4-20x12-7-messing-gewindebuchsen-fur-3d-druck-1) to enable the most stable screw connections possible.
There are two different versions, one for the front side and one for the top side.
Both versions are fastened with M5 pan-head screws for which countersinks are provided.
The version for the top side can accommodate washers. This is not possible with the front side version due to lack of space.
To use the front side version, M5 threads must be cut into the holes in the profile. The top side version can be fastened with slot stones.
These adapters use 1/4" threaded inserts from Ruthex (https://www.ruthex.de/en/collections/gewindeeinsatze/products/ruthex-gewindeeinsatz-1-4-kameragewinde-20-stuck-rx-1-4-20x12-7-messing-gewindebuchsen-fur-3d-druck-1) to enable the most stable screw connections possible.
There are two different versions, one for the front side and one for the top side.
Both versions are fastened with M5 pan-head screws for which countersinks are provided.
The version for the top side can accommodate washers. This is not possible with the front side version due to lack of space.
To use the front side version, M5 threads must be cut into the holes in the profile. The top side version can be fastened with slot stones.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
