Thingiverse
rack mount case for pidp8
by frayja2002
18
Downloads
22
Likes
0
Makes
A rack mount case for Oscars pidp8 project.
http://obsolescence.wixsite.com/obsolescence/pidp-8
This is a work in progress.
Made from 3mm (red) and 6mm (green) MDF. Cyan is engrave.
The standoffs above the board are 20mm. 10mm on the rear, and 12mm on the front of the board, hopefully making it sit fairly close to the right position.
Assemble pwba mounting plate as first part of box. Some pictures do not show the extra strengthening parts behind the board.
Raspberry Pi goes on stan
http://obsolescence.wixsite.com/obsolescence/pidp-8
This is a work in progress.
Made from 3mm (red) and 6mm (green) MDF. Cyan is engrave.
The standoffs above the board are 20mm. 10mm on the rear, and 12mm on the front of the board, hopefully making it sit fairly close to the right position.
Assemble pwba mounting plate as first part of box. Some pictures do not show the extra strengthening parts behind the board.
Raspberry Pi goes on stan
Sign in to leave a comment
Sign in