Thingiverse
Direct-drive Simplified
by Sailor96
14
Downloads
10
Likes
0
Makes
**Uploaded 1/22/2017**
**UPDATES:**
*1/24/2017* 624 bearing idler id change to a more press fit, widened out the lip for the extruder flange so that it wasn't so tight to install, changed the other nut hole to 3mm also
*1/24/2017* PTFE inner and outer ports implemented as well as further tweaking with size and simplicity
*1/26/2017* 624 bearing is now held by a flat head m4 bolt and nut.
Widened the PTFE counter-bores. Widened the cold-end flange height. Removed strange flange that pre
**UPDATES:**
*1/24/2017* 624 bearing idler id change to a more press fit, widened out the lip for the extruder flange so that it wasn't so tight to install, changed the other nut hole to 3mm also
*1/24/2017* PTFE inner and outer ports implemented as well as further tweaking with size and simplicity
*1/26/2017* 624 bearing is now held by a flat head m4 bolt and nut.
Widened the PTFE counter-bores. Widened the cold-end flange height. Removed strange flange that pre
Sign in to leave a comment
Sign in