Thingiverse
MKS GEN Motherboard mount bracket for 2020 v-slot extrusion alu profile
by nekobasu
39
Downloads
18
Likes
0
Makes
A rigid mount bracket for MKS GEN electronics on a 2020 V-slot extrusion.
Tested with MKS Gen 1.4
In 'bottom aligned" version the bottom of the bracket is aligned with the edge of extrusion,
In "top aligned" - upper surface of the bracket is on the same level with extrusion edge.
"2040" version is for 20x40 alu extrusion frame, with a notch for 2040 alu angle bracket.
Insert 4 m3 nuts in the seats at bottom surface, and use 4 M3x12 screws to attach PCB to the bracket.
To attach the b
Tested with MKS Gen 1.4
In 'bottom aligned" version the bottom of the bracket is aligned with the edge of extrusion,
In "top aligned" - upper surface of the bracket is on the same level with extrusion edge.
"2040" version is for 20x40 alu extrusion frame, with a notch for 2040 alu angle bracket.
Insert 4 m3 nuts in the seats at bottom surface, and use 4 M3x12 screws to attach PCB to the bracket.
To attach the b
Sign in to leave a comment
Sign in