Steyr Aug Body Pin

Replacement receiver/body pin for Steyr Aug
---
You will need:
---
* 2x screws approx. 4mm long, 3mm diameter (countersunk head)
* 1x spring approx. 3.8mm outer diameter, 7mm long

Notes:

* The screw holes are slightly undersized so that you can use screws to tap a thread, go and remember to back them out a half turn every now and then on first assembly

* I've broken the model down into the 3 parts so you can rotate them easier in your slicing software :)

* I haven't printed this