Thingiverse
Adafruit PowerBoost 1000C Case
by gschora
33
Downloads
15
Likes
1
Makes
This is a case for the Adafruit Powerboost 1000c.
Use transparent material, so you can see the leds (in my case transparent PETG from RS Pro)
I soldered a small switch on, so I can switch it on or off.
You need to drill a small hole into the button and maybe file a bit in the sides of the button, so it is a snug fit.
The battery case is for a LiPo 6600mAh (3C, 3.7 V, JST VH-2P) like this one:
http://www.exp-tech.de/3c-polymer-lithium-ion-battery-6600mah
I also included a 3d-model of
Use transparent material, so you can see the leds (in my case transparent PETG from RS Pro)
I soldered a small switch on, so I can switch it on or off.
You need to drill a small hole into the button and maybe file a bit in the sides of the button, so it is a snug fit.
The battery case is for a LiPo 6600mAh (3C, 3.7 V, JST VH-2P) like this one:
http://www.exp-tech.de/3c-polymer-lithium-ion-battery-6600mah
I also included a 3d-model of
Sign in to leave a comment
Sign in