Thingiverse
K8200 XY Axis Upgrade
by pcsentinel
25
Downloads
7
Likes
0
Makes
A full X and Y upgrade for the K8200 3D Drag printer.
Designed to:
Encase the Y Axis cables in a cable chain.
House the Stepper motors with a Damper attached to each.
Replace the X and Y End Stop mechanisms.
Allow for proper tensioning of the Y axis belt (now using a GT2 belt)
Both the motor housings have been designed to work with the two plate damper that is available from many places (See pic).
The cable chain is 14mm x 10mm.
The motors are both fitted with a low tooth count
Designed to:
Encase the Y Axis cables in a cable chain.
House the Stepper motors with a Damper attached to each.
Replace the X and Y End Stop mechanisms.
Allow for proper tensioning of the Y axis belt (now using a GT2 belt)
Both the motor housings have been designed to work with the two plate damper that is available from many places (See pic).
The cable chain is 14mm x 10mm.
The motors are both fitted with a low tooth count
Sign in to leave a comment
Sign in