Thingiverse
Geared Arduino Clock
by reichertd
32
Downloads
25
Likes
0
Makes
***UPDATE Feb 5/17***
So I scaled up the frame and motor mount, but because of that the holes on the motor were too narrow, so I drill and bent them out, gears fit much better, but still need a little tweaking. https://www.youtube.com/watch?v=_exBGDI-vp0&feature=youtu.be
***UPDATE Feb 4/17***
Put together, but real tight, going to scale the frame up a little and see if that helps.
***********************
What I did was combine the gear sets into 1 model, so you don't have to glue them
So I scaled up the frame and motor mount, but because of that the holes on the motor were too narrow, so I drill and bent them out, gears fit much better, but still need a little tweaking. https://www.youtube.com/watch?v=_exBGDI-vp0&feature=youtu.be
***UPDATE Feb 4/17***
Put together, but real tight, going to scale the frame up a little and see if that helps.
***********************
What I did was combine the gear sets into 1 model, so you don't have to glue them
Sign in to leave a comment
Sign in