Backgammon

Backgammon set that should close together with all the checkers inside; 2 dice needed but not included.

One side of board: 201.8mm x120.4mm x11.8mm
Checker: 7.5 mm radius, 5.5 mm height

Printing: The simplebgboard.stl and axle.stl files must both be printed twice. If scaled down, the axle probably won't fit, my suggestion is to try a piece of wire or a paper clip. A paper clip can be bent to form the hook on the front. The checkerset files print a full set of 15 checkers. Print twice in