Flight Controller box for VAS Banshee

Needed somewhere to put my flight controller on my second VAS Banshee, so I built this.
it fits the on the bottom side of the airplane, just have to cut out the EEP buckout for the ESC.
Its close to but a bit aft of the CG on this plane. I used M3 screws from the underside of the of the print to attach short stand offs to hold the FC.
Look at the pictures and you can see how I cut the EPP. The Lid is held in place with #2x 1/2" screws from the hardware store. The sides are open to allow you t