Thingiverse
Ares CrossfireRacer - Front Brace
by yelrx8
1
Downloads
1
Likes
0
Makes
This is a front brace for the Ares Crossfire Racer quadcopter. This taller than stock brace allows the stock camera and plate to be removed and thus braces the cantilevered upper plate.
MUST be used with 26mm standoff's for upper plate to frame, instead of the stock 19mm standoff's. The overall height of this brace is 40mm.
Nylon standoffs (10mm long) are used as nuts. Two new holes are to be drilled on the top plate, in front of the FC mount holes.
The stock PDB cannot be used with th
MUST be used with 26mm standoff's for upper plate to frame, instead of the stock 19mm standoff's. The overall height of this brace is 40mm.
Nylon standoffs (10mm long) are used as nuts. Two new holes are to be drilled on the top plate, in front of the FC mount holes.
The stock PDB cannot be used with th
Sign in to leave a comment
Sign in