Thingiverse
Fidget Toy Hand Spinners for 1/2" Ball Bearings
by FluxAxiom
324
Downloads
269
Likes
10
Makes
No glue needed!
Press the 608 bearing cartridge into the center first - easier to align this way. You want to make sure it is flush on either side. The 608 bearings are the common skateboard bearing size with a 22mm OD
1/2" loose ball bearings press in and snap into center of holes with an audible click. They will rotate in their sockets and not come out. The weight will be balanced when spinning because there is no guess work as to where the center of the hole is.
Buttons have a shoul
Press the 608 bearing cartridge into the center first - easier to align this way. You want to make sure it is flush on either side. The 608 bearings are the common skateboard bearing size with a 22mm OD
1/2" loose ball bearings press in and snap into center of holes with an audible click. They will rotate in their sockets and not come out. The weight will be balanced when spinning because there is no guess work as to where the center of the hole is.
Buttons have a shoul
Sign in to leave a comment
Sign in