20mm switch box for 3d printer

Continuing with learning how to make things, I wanted to make a switch box I could use to control the white LEDs on my printers seperate from the motherboard. I decided to make this thing as a clam shell style setup allowing you to screw it onto your printers 2020 or 2040 extruders.

The overall height is 20mm and the w/l is 24mm this allowed me to basically use a really cool power switch from pololu:

https://www.pololu.com/product/2809

and a 12mm a/v momentary switch to have a "soft on/off" and also use the LED in the button for extra coolness!

The outer shell is 2mm thick in case you need to change the top holes diameter, while the mushroom is for plugging the hole you use to screw the switch onto your printer.